Panasonic WORKIO DP-CL21 Network Manual page 125

Settings and Printing
11
With the Host Address radio button selected, enter the IP Address of the
printer (tab between each field), enter lp in the Printer Name box, and then
click [Finish].
Or
Click on Host Name check button, enter the host name of the printer, enter lp in
the Printer Name box, and then click [Finish].
The Select Printer Drivers window is displayed.
12
If the printer driver(s) have not been installed into the NDPS Broker, then select
[None] from the Printer Drivers box. Click [Continue].
NOTE:
• For detailed instruction on adding the alternate printer driver, refer to the NetWare manual.
13
Click [OK].
The NDPS printer DP-CL21M will be displayed in the NetWare Administrator window.
Maintenance and Spec. Network
Network
Setup in NetWare
125