Panasonic WORKIO DP-CL21 Network Manual page 113

Settings and Printing
7
Click on the Yes check button, and then [Finish].
A list of printers residing on the network is displayed.
• If you want to search the network for printers again, click the Device menu and select Search.
8
Select the printer you want to set up from the list. Then click the Setup menu
and select Network Setup....
NOTE:
• When several printers are listed in the Network Setup Tool window, select the printer using the
MAC address. You can obtain the number (hexadecimal six digits) from the label near the
network interface connector or by printing a configuration page (press MENU/EXIT button,
select Test Page, select Configuration Page and press ENTER button).
• If a password is set in the printer, you must enter the password and click [OK]. If a password is
not entered, you can still see the printer's setting by checking on the Guest user check box,
but you cannot change it. To set a password, refer to
Setup Tool" on page
Maintenance and Spec.
154.
Network
Network
Setup in NetWare
"Setting Password with Network
113