Panasonic WORKIO DP-CL21 Network Manual page 81

Settings and Printing
10
Select the desired setup type, and then click [Next >].
• If DP-CL21P or DP-CL21M printer software is already installed, the Choose Destination
Location window is not displayed. The printer software is automatically installed in the same
folder.
• The following software is installed depending on the setup type. If selecting Custom, the
Select Components window is displayed, then select components to install by clicking on the
check boxes and click [Next >].
Typical
PCL 5c Printer Driver
PostScript Printer
1
Driver*
LPR PortMonitor
Status Display
HDD Utility *
Operating Instructions
1
* Can be selected if installed in the DP-CL21M only.
2
* Only available when the hard disk drive is installed in the printer.
11
If selecting Printer Server PC at step 6, specify the shared printer name.
Click [Next >].
Maintenance and Spec.
Compact
PCL 5c Printer Driver
PostScript Printer
1
Driver*
2
Network
Network
Setup in Windows
Custom
PCL 5c Printer Driver (Selected)
PostScript Printer Driver
1
(Selected)*
LPR PortMonitor (Selected)
Status Display (Selected)
2
HDD Utility*
Print Media Test Pattern (Not
selected)
Operating Instructions (Selected)
81