Panasonic WORKIO DP-CL21 Network Manual page 52

Settings and Printing
6
Click the printer you want to set up from the list. Then click the Setup menu and
select Network Setup....
NOTE:
• When several printers are listed in the Network Setup Tool window, select the printer using the
MAC address. You can obtain the number (hexadecimal six digits) from the label near the
network interface connector or by printing a configuration page (press MENU/EXIT button,
select Test Page, select Configuration Page and press ENTER button).
• If a password is set for the printer, you must enter the password and click [OK]. If a password
is not entered, you can still see the printer's setting by checking on the Guest user check box,
but you cannot change them. To set a password, refer to
Setup Tool" on page
7
Click the NetBEUI/NetBIOS tab.
Maintenance and Spec.
154.
Network
Network
Setup in Windows
"Setting Password with Network
52