Panasonic WORKIO DP-CL21 Network Manual page 114

Settings and Printing
9
Click the NetWare tab.
NOTE:
• You can change the Print Server Name and Printer name. After changing, click [Setup]. Then
go back to the step 8.
10
Click on the PSERVER Mode check button.
11
Click [Setup].
12
If you change the setting, click [OK], then click [Yes].
The following are the steps to set up the server.
13
Select the printer you want to configure in the Network Setup Tool window.
14
Click the Setup menu and select Create NetWare Queue.
15
Follow the instructions on the screen.
When asked to select NDS mode or Bindery mode, select NDS Mode and click [Next >].
Maintenance and Spec. Network
Network
Setup in NetWare
114