Panasonic WORKIO DP-CL21 Network Manual page 164

Settings and Printing
■ NetWare
Name
Use NetWare Protocol
Frame Type
Printer Name
Operation Mode
Print Server Name
Password
Job Polling Time
Bindery Mode
File Server Name
NDS Tree
NDS Context
Print Server Name
Time Out
Maintenance and Spec.
Factory Default
ENABLE
802.2
DPCLxxxxxx-Printer
PSERVER
DPCLxxxxxx
NULL
4 seconds
ENABLE
NULL
NULL
NULL
NULL
10 seconds
Network
Network
Description
Enables or disables NetWare printing.
Sets default Frame type used by DP-CL21P or
DP-CL21M. If DP-CL21P or DP-CL21M does
not work with the frame type, it will be
automatically changed to different type.
Sets printer name registered to the NetWare
server. This name must be same as the printer
name registered to the NetWare server.
Sets operation mode (PSERVER or
RPRINTER). If DP-CL21P or DP-CL21M does
not work with the current operation mode, it will
be automatically changed to different mode.
Sets a print server name for PSERVER mode.
Sets a password to log on the file server.
Sets the interval to log on the file server.
Enables or disables Bindery mode.
You may set the name of the file server (up to 8
servers).
Sets the NDS tree. Normally, DP-CL21P or
DP-CL21M will automatically detect the tree
name.
However, when there are several trees within
the network, you must set the name.
Sets the context used by NDS in the print server
name.
You may set the print server name (up to 8
servers) to which the DP-CL21P or DP-CL21M
is connected.
A time for DP-CL21P or DP-CL21M to recognize
the end of a job in remote printer mode.
164
Appendix