Panasonic WORKIO DP-CL21 Network Manual page 10

Settings and Printing
■ Step 2: Setting up TCP/IP on the printer
You need to set the IP Address, Subnet Mask and Default Gateway for the printer. It can be set by using
one of the following three methods. You may need to contact your network administrator to select the
best way to setup.
• Using the DHCP server (see below)
• Using the Network Setup Tool (see
• Using the Printer Panel (see
NOTE:
• You can also setup the printer using BOOTP or RARP.
■ Using the DHCP server
If the administrator manages the network with DHCP server, it will automatically assign an IP Address,
Subnet Mask and Default Gateway. These can be viewed by printing out the configuration page on the
printer.
1
Press MENU/EXIT (Pause) button on the printer panel.
2
Press
!
3
Press ENTER button.
Menu Map menu appears.
4
Press
!
5
Press ENTER button.
The configuration page will be printed.
6
Confirm the IP Address on the configuration page.
NOTE:
• If the printer receives the IP Address with unlimited lease term, the printer keeps the address
permanently. The printer saves the address statically and the DHCP function becomes disable
automatically.
Maintenance and Spec.
page
page 21
(CONTINUE) button until Test Page menu appears.
(CONTINUE) button until Configuration Page menu appears
11)
in "Settings and Printing")
Network
Network
Setup in Windows
10