Using Netbeui In Windows 2000 - Panasonic WORKIO DP-CL21 Network Manual

Settings and Printing

Using NetBEUI in Windows 2000

The following are the steps to print using the NetBEUI protocol in Windows 2000.
Step 1: Setting up NetBEUI on the computer
Step 2: Setting up NetBEUI on the printer
Step 3: Setting up the printer driver and the printer port on the computer
• When printing directly from a computer to a printer or through a shared computer (server),
step 3 must be performed on all Windows 2000 computers.
■ Step 1: Setting up NetBEUI on the computer
To print using the NetBEUI protocol, the NetBEUI protocol must be installed in your computer. Refer to
help menu or documentation in Windows.
■ Step2: Setting up NetBEUI on the printer
Refer to "Step 2: Setting up NetBEUI on the printer" on page 50
95 / Windows 98 / Windows
■ Step 3: Setting up the printer driver and the printer port on the
computer
[A] If the printer driver is not installed
First install the printer driver and then set up the printer port. Refer to
driver and the printer port on the computer" on page 54
Windows 98 / Windows
[B] If the printer driver is already installed
Set up the printer port. Refer to
computer" on page 94
Maintenance and Spec.
Me".
Me".
"Step 3: Setting up the printer driver and the printer port on the
in "Using NetBEUI in Windows NT
Network
Network
in "Using NetBEUI in Windows
"Step 3: Setting up the printer
in "Using NetBEUI in Windows 95 /
4.0".
104
Setup in Windows