Lpr Port Printing Using Tcp/Ip In Windows Nt 4.0 - Panasonic KX-P7105 Operating Instructions Manual

Settings and Printing

LPR Port printing using TCP/IP in Windows NT 4.0

The following is the outline of the steps how to set up LPR port printing using the TCP/IP
protocol in Windows NT4.0.
Step 1: Setting up TCP/IP on the computer
Step 2: Setting up TCP/IP for the printer
Select a network printing method before proceeding the step 3.
• When printing directly from a computer to the printer, perform steps 3 and 4 on
each computer (Windows NT 4.0).
• When printing through the shared computer (server), perform steps 3 to 5 on the
server computer (Windows NT 4.0), then perform step 6 on each client computer
(Windows 95, Windows 98, Windows Me, Windows NT 4.0 or Windows 2000).
Step 3: Installing the LPR port on the computer
Step 4: Setting up the printer driver and the printer port on the computer
Step 5: Sharing the printer port on the server computer
Step 6: Setting up the printer driver and printer port on the client computer
Step 1: Setting up TCP/IP on the computer
Refer to "Step 1: Setting up TCP/IP on the computer" on page 8
TCP/IP in Windows 95 / Windows 98 / Windows Me".
Step 2: Setting up TCP/IP for the printer
Refer to "Step 2: Setting up TCP/IP for the printer" on page 9
IP in Windows 95 / Windows 98 / Windows Me".
Maintenance and Spec. Network
Network
Setup in Windows
in "LPR Port printing using
in "LPR Port printing using TCP/
49