Table of Contents
Advertisement
Tab.49
Selectable tiles for the user
Tile
Menu
Information menu.
Error indicator.
Holiday Mode.
Operating mode.
,
,
,
Gas boiler indicator.
Water pressure indicator.
Zone setup
,
,
,
,
,
,
DHW setup.
Outdoor sensor setup.
Cascade settings.
11.4
Activating holiday programs for all zones
11.5
Heating circuit configuration
Tab.50
Menu to configure heating circuit
Menu
Set heating temperatures
Operating mode
Time programs heating
Zone configuration
7837114 - v.01 - 10012023
Function
Read out various current values.
Read out details about the current error.
With some errors the
icon will appear with installer contact details (when
filled in).
Set the start and end date of your holiday to lower the room and domestic hot
water temperatures of all zones.
Change whether your appliance is set to heating, or both, or is turned off.
Read out burning details of the boiler and switch the heating function of the
boiler on or off.
Shows the water pressure. Top-up the installation when the water pressure is
too low.
Configure the settings per heating circuit.
Configure the domestic hot water settings.
Configure the temperature regulation using the outdoor sensor.
Configure the cascade manager settings.
When you go on holiday, the room temperature and domestic hot water
temperature can be reduced to save energy. Using the following
procedure you can activate the holiday mode for all zones and domestic
hot water temperature.
Use the rotary knob to navigate.
Use the
button to confirm your selection.
1. Select the tile [
].
2. Select Start date holiday.
3. Configure the start date.
4. Select End date holiday.
The day after the start date of your holiday is displayed.
5. Configure the end date.
6. Select Wished room zone temperature on holiday period.
7. Configure the temperature.
You can reset or cancel the holiday program by selecting Reset in the
holiday mode menu.
For every heating circuit there is a quick user settings menu available.
Select the heating circuit you want to configure by selecting the tile [
[
], [
], [
], [
], [
Function
Set the temperatures for the timer program.
Set the operating mode.
Set and configure the time programs used when in operating mode
Scheduling.
Configure the settings of the zone circuit.
] or [
]
11 User instructions
],
67
Advertisement
Table of Contents
