Table of Contents
Advertisement
11 User instructions
11.6.6
Changing the room temperature temporarily
11.7
Changing the domestic hot water temperature
11.7.1
Domestic hot water configuration
Tab.55
Menu to configure domestic hot water
Menu
Domestic Hot Water Setpoints
Operating mode
Time programs
DHW configuration
Tab.56
Extended menu to configure the domestic hot water circuit DHW configuration
Menu
Hot water boost
Holiday Mode
DHW mode
11.7.2
Changing the domestic hot water operating mode
72
Regardless of the operating mode selected for a zone, it is possible to
change the room temperature for a short period. After this period has
elapsed, the selected operating mode resumes.
Select zone > Operating mode > Short temperature change
Use the rotary knob to navigate.
Use the
button to confirm your selection.
The room temperature can only be adjusted in this way if a room
temperature sensor/thermostat is installed.
1. Select the tile of the zone you want to change.
2. Select Operating mode
3. Select
Short temperature change.
4. Set the duration in hours and minutes.
5. Set the temporary room temperature.
Configure the domestic hot water settings by selecting the tile [
Function
Set the DHW temperatures for the timer program.
Set the operating mode.
Set and configure the time programs used when in operating mode
Scheduling.
Configure the settings of the DHW circuit.
Function
Change the DHW temperature temporarily.
Set the start and end date of your holiday.
Select the DHW operating mode: Scheduling, Manual.
You can change the operating mode for hot water production. You can
choose from 5 operating modes.
> Operating mode
Use the rotary knob to navigate.
Use the
button to confirm your selection.
1. Select the tile [
].
2. Select Operating mode
This option is not available when installer access is enabled.
]
7837114 - v.01 - 10012023
Advertisement
Table of Contents
