Table of Contents
Advertisement
4 Before installation
Tab.3
Specific devices delivered with the Gas 210 Ace boiler
Name visible
Software ver
in display
sion
CU-GH13
2.0
MK3
1.94
SCB-01
1.3
SCB-02
1.3
GTW-
-
Bluetooth
4
Before installation
4.1
Installation regulations
4.2
Location requirements
12
Description
Control unit CU-GH13
Control panel HMI T-control
Expansion PCB SCB-01
Expansion PCB SCB-02
Gateway BLE Smart Antenna
When choosing the best installation location, consider:
The regulations.
The required installation space.
The required space around the boiler for good access and to facilitate
maintenance.
The permitted position of the flue gas outlet and/or air supply opening.
Function
The CU-GH13 control unit handles all basic functionality of the
Gas 210 Ace boiler.
The HMI T-control is the user interface to the Gas 210 Ace
boiler.
The SCB-01 provides a 0-10 V connection for a PWM system
pump and two potential-free contacts for status notification.
The SCB-02 provides functionality for a DHW and central
heating zone, a 0-10 V connection for a PWM system pump
and two potential-free contacts for status notification.
The BLE Smart Antenna provides functionality to connect the
boiler to an app via Bluetooth.
Important
The Gas 210 Ace must be installed by a qualified installer in
accordance with local and national regulations.
Warning
The installer must be registered with Gas Safe and have the
correct ACS qualifications.
Important
Practical guidelines - see the latest version.
Danger
It is forbidden to store, even temporarily, combustible products
and substances in or near the boiler.
Caution
The boiler must be installed in a frost-free area.
An earthed electrical connection must be available close to the
boiler.
A connection to the drain must be present for the condensate
drain close to the boiler.
7837114 - v.01 - 10012023
Advertisement
Table of Contents
