5 Installation
5.3
Connecting the condensate drain pipe
Fig.27
Connecting the condensate drain
pipe
1
5.4
Connecting the gas pipe
Fig.28
Connecting the gas pipe
5.5
Connecting the air inlet and flue gas outlet
Fig.29
Fit the flue gas outlet pipe to the
boiler
1.1
26
2
3
AD-3002437-01
3
2
1
AD-3002438-01
AD-3002439-01
1. Remove the protective cap from the condensate connection.
Caution
Water from the factory test may come out.
2. Fit the trap by screwing the swivel nut onto the connection.
3. Fit a plastic drain pipe of Ø 32 mm or larger to the trap, terminating in
the drain.
1. Remove the dust cap from the gas connection
2. Fit a gas valve near the boiler.
3. Fit the gas supply pipe to the gas supply
1. Connect the flue gas outlet:
1.1. Fit the flue gas outlet pipe to the boiler.
1.2. Fit the subsequent flue gas outlet pipes in accordance with the
manufacturer's instructions.
Caution
The pipes must not be resting on the boiler.
Fit the horizontal parts sloping down towards the boiler, with a
slope of 50 mm per metre.
.
.
7837114 - v.01 - 10012023