Establishing A Bluetooth Connection; List Of Parameters; Cu-Gh13 Control Unit Parameters - REMEHA Gas 210 Ace 80 Installation And User Manual

8 Settings
Tab.38 Configuring a zone or function
Parameters, counters, signals
Parameters
Counters
Signals
8.3.2

Establishing a Bluetooth connection

Fig.78 Bluetooth enabled
00:12 ........ ....... ........ ......... ...
..... ... ....... .... .. ..... ....... .... ..... .......
i
........ .......
.............. ...
...... ... .
........ .. ....... .... ...
..... ... ....... .... .. ..... ....... .... ..... .......
8.4

List of parameters

8.4.1

CU-GH13 control unit parameters

Tab.39 Navigation for basic installer level
Level Menu path
Basic installer
General
(1) See the column "Submenu" in the following table for the correct navigation. The parameters are grouped in specific functionalities.
(2) The parameters can also be accessed directly via the Search datapoints function:
46
Description
Set the parameters at installer level
Read the counters at installer level
Read the signals at installer level
A
.... ...
...... ..
AD-3002081-01
> Installation Setup > CU-GH13 > Submenu
(2)
A GTW-35 is needed to connect to the appliance via Bluetooth.
Proceed as follows to establish a Bluetooth connection:
> Bluetooth
Use the rotary knob to navigate.
Use the button to confirm your selection.
1. Enable Bluetooth on the appliance:
A Bluetooth is enabled when the Bluetooth icon is displayed
In most cases Bluetooth is enabled in the factory settings.
1.1. Press the
button.
1.2. Select Bluetooth.
1.3. Select Bluetooth.
1.4. Select On.
Bluetooth is now enabled.
2. Connect to the appliance with a mobile device:
2.1. On the mobile device, connect to CU-GH13_.......... or
GTW-35_...........
The appliance detects the incoming pairing request and
displays the pairing code and Bluetooth status.
2.2. Use the pairing code displayed on the appliance.
2.3. Wait for the pairing process to finish before interacting with the
appliance.
All tables show the factory setting for the parameters.
Important
The tables also list parameters that are only applicable if the boiler
is combined with other equipment.
> Parameters, counters, signals > Parameters >
(1)
> Installation Setup > Search datapoints
7837114 - v.01 - 10012023