Pressure Sensor: Removal - Refitting - Renault 2009 X79 Owner's Manual

Pressure sensor: Removal - Refitting
AIR CONDITIONING
Tightening torquesm
pressure sensor
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 388, 80A, Battery).
a Remove:
- the engine cover,
- the air intake sleeve.
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Disconnect the pressure sensor.
Note:
An automatic shut-off valve isolates the circuit
from the outside during removal; do not drain the
refrigerant from the circuit.
a Remove the pressure sensor (1) .
AIR CONDITIONING
9 N.m
24780
62A-23
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the pressure sensor.
a Torque tighten the pressure sensor (9 N.m).
a Connect the pressure sensor.
II - FINAL OPERATION.
a Refit:
- the air inlet sleeve,
- the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 388, 80A, Battery).
62A