Table of Contents
Advertisement
Tap
to save.
7
Tap
to go back to the previous page.
8
To check if the parameters entered are valid, see "Test the data
9
storage (optional)" below.
TEST THE DATA STORAGE (OPTIONAL)
Note: the test function is available only if the remote data storage is
enabled. See "Set the remote folder for saving the reports (optional)" on the
previous page.
On the homepage, tap
1
Tap
: a sequence of tests is automatically performed.
2
In case a test fails, check the relevant settings and tap
3
repeat the test sequence, if the error persists call your IT
manager.
Tap
to go back to the previous page.
4
Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl
>
>
SAVE ALL THE CYCLE REPORTS IN A REMOTE FOLDER
(OPTIONAL)
Note: the save all function is available only if the remote data storage is
enabled. See "Set the remote folder for saving the reports (optional)" on the
previous page.
Only the last 400 cycles in HTML and 5 cycles in SCL in the sterilizer
memory can be saved in the remote folder.
On the homepage, tap
1
Tap
to start the remote saving.
2
to
Sterilization cycles
>
>
>
57
Advertisement
Table of Contents
