W&H Lyla Instructions For Use Manual page 40

Sterilizer tests
PURPOSE OF THE TEST
The test is used to validate the sterilizer performance for textile load sterilization.
DESCRIPTION
It consists of several sheets of paper wrapped in a small packet with a chemical heat-sensitive indicator sheet in the middle. The colour assumed
by this indicator sheet at the end of the sterilization cycle gives the result of the test.
CARRY OUT THE TEST
Note : carry out the test according to the local Regulations.
40 Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl