Operating The Sterilizer - W&H Lyla Instructions For Use Manual

Operating the sterilizer

POWER THE STERILIZER ON/OFF
Press the power switch behind the service door: once switched
1
ON, the visual indicator on the power switch turns green.
After a quick autotest the sterilizer automatically turns in
2
Standby mode. See "Standby mode" on page 32.
Note: at the first start-up of the sterilizer, the Guided Configuration procedure
automatically appears; see "Sterilizer setup" on page 30
Tap . The homepage appears with the enabled sterilization
3
cycles.
HOMEPAGE DESCRIPTION
Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl
Part Description
Title/purpose of the
A
screen, or the cycle
number and the current
date and time
B Available cycles
C Additional buttons used to
navigate the menu
Getting started
23