Table of Contents
Advertisement
Sterilization cycles
Tap
and enter your credentials if required: the door locks. If
5
you have not set a different start time, the sterilization starts
immediately.
Wait the end of the sterilization. Tap
6
parameters in real time. See "View the cycle parameters" on the
next page.
The sterilization is completed. Tap
7
summary or tap
to view the cycle information. See "View the
cycle parameters" on the next page.
Tap OPEN: the door unlocks.
8
If required, enter your credentials and confirm the release of the
9
load.
SET THE STERILIZATION CYCLE START
You may schedule the start of the sterilization cycles at a certain
date and time (e.g., if you want to load the sterilizer in the evening
and run standard sterilization cycle early the next morning before
office hours). You can set the cycle start date and time and enable or
disable it for each cycle.
On the homepage, tap the cycle.
1
To change the start time, tap Start cycle at.
2
Tap the time or the date: a settings page opens.
3
52
to view the cycle
to view the cycle
Tap the number you want to change and tap
4
increase it or decrease it.
Tap
to confirm and go back to the previous page.
5
Tap
to lock the door and start the countdown for the current
6
cycle.
Note: you can decide to start the cycle immediately or stop the countdown
at any time.
SET THE DRYING TIME
The drying time of the AUTO DRY and ECO DRY plus modes is
automatically adjusted to the total amount of load and cannot be
modified (see "Sterilization cycle description" on page 50). To set a
new drying time for the program, you should disabled the AUTO DRY
and ECO DRY plus modes first.
On the homepage, tap the cycle and
1
Tap the time: a settings page opens.
2
Tap
or
to increase the minutes or decrease them.
3
Note: for the minimum value of the drying time for each cycle see
"Sterilization cycles" on page 96.
Tap
to confirm and go back to the previous page. If
4
Remember next time is selected, this becomes the new fixed
value.
Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl
or
to
.
Advertisement
Table of Contents
