Managing Printers; Printer Selection (Optional); Label Printer Selection (Optional) - W&H Lyla Instructions For Use Manual

Managing printers

CONTENTS
This section deals with the following subjects:

Printer selection (optional)

Label printer selection (optional)

Label printer usage (optional)
Label content description
Printer selection (optional)
SELECT THE PRINTER
Note: the sterilizer only supports the specific printer models available
through manufacturer/distributor.
On the homepage, tap
1
Tap the model of the printer to use.
2
Tap to confirm and go back to the previous page.
3
36
36
36
37
38
> >
Label printer selection (optional)
FUNCTION AVAILABILITY
The first time you access the Label Printer (
requested to enter an activaction code. To require the activation
code, please refer to the activation code instructions provided with
the label printer.
LABEL PRINTER SETUP
Labels can be printed by a local label printer. The local label printer
is connected to the sterilizer.
SELECT AND CALIBRATE A LOCAL LABEL PRINTER
On the homepage, tap
1
Tap : the local printer is located automatically.
2
Tap to center the printout properly in the label area.
3
Tap to print a test label.
4
If the printout is not duly centered, tap
5
horizontally (x) and vertically (y).
If necessary, tap to print another test label and repeat step
6
4.
Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl
) menu, you will be
> >
or to center it