W&H Lyla Instructions For Use Manual page 78

Maintenance
Insert the new seal and press first up and down.
5
Press left and right and then the entire seal circumference to ensure its perfect
6
placement.
Notice: a steam discharge can damage the sterilizer plastic parts. Ensure the seal
does not stick out.
Wipe any residual water and run a Vacuum and Helix test to check for perfect
7
tightness of the seal. See "Vacuum test" on page 45 and "Helix test" on page 43.
78 Lyla | Instructions for Use | RIN-210 ENG Rev02 | 15/09/2022 | © W&H Sterilization Srl