Operating The Sterilizer - W&H Lexa PLUS Instructions For Use Manual

Operating the sterilizer

POWER THE STERILIZER ON/OFF
Press the power switch behind
1
the service door: once
switched ON, the visual
indicator on the power switch
turns green.
After a quick autotest the sterilizer automatically turns in
2
Standby mode. See "Standby mode" on page 37.
Note: at the first start-up of the sterilizer, the Guided Configuration
procedure automatically appears; see "Sterilizer setup" on page 34
Tap . The homepage appears with the enabled sterilization
3
cycles.
Lexa PLUS | Instructions for Use | RIS-311 ENG Rev03 | 29/08/2022 | © W&H Sterilization Srl
HOMEPAGE DESCRIPTION
Getting started
Part Description
A Title/purpose of the screen,
or the cycle number and the
current date and time.
Available cycles and tests.
B
Additional buttons used to
C
navigate the menu.
27