Operating the sterilizer
POWER THE STERILIZER ON/OFF
Press the power switch behind
1
the service door: once
switched ON, the visual
indicator on the power switch
turns green.
After a quick autotest the sterilizer automatically turns in
2
Standby mode. See "Standby mode" on page 37.
Note: at the first start-up of the sterilizer, the Guided Configuration
procedure automatically appears; see "Sterilizer setup" on page 34.
Tap
. The homepage appears with the enabled sterilization
3
cycles.
Lexa | Instructions for Use | MN-111 ENG Rev14 | 03/04/2023 | © W&H Sterilization Srl
HOMEPAGE DESCRIPTION
Getting started
Part
Description
A
Title/purpose of the screen,
or the cycle number and the
current date and time.
Available cycles and tests.
B
Additional buttons used to
C
navigate the menu.
27