PCpaK
Functionality
______________________________________________________________________________
PCpaK
PCpaK Functionality
The MillipaK 4QPM controller has the capability to communicate with PCpaK. PCpaK can be
used to configure the controller personalities as well as allowing the application software to be
upgraded to either the latest or previous software version. Contact Sevcon to obtain the complete
PCpaK application package comprising of application software, communication interface and user
manual.
Program Mode
The MillipaK 4QPM controller must be configured into program mode to allow the down load of
application software only into the flash memory when using PCpaK. Pin 16 of the 16-way molex
(connector B) connector must be connected to pin 1 (key switch input). The controller will
automatically enter program mode when it is keyed on and the system status LED shall remain
off.
MillipaK 4QPM Controller Manual
Page 62
13/08/03