Safety Features; Start Up Sequence - Sevcon MillipaK 4QPM Manual

Safety Features

______________________________________________________________________________
Safety Features
The features listed in this section are designed with the safety of the operator in mind.

Start Up Sequence

At keyswitch on, the Direction and FS1 switches must be in the neutral condition simultaneously
at least once before drive can be selected. This is a safety feature to help prevent unexpected
movement immediately after power up.
Alternatively, the system may be programmed only to check FS1 at power on. This option is
programmable:
Direction Switch Checking
Calibrator Menu Reference:
Options
OFF
MillipaK 4QPM Controller Manual
ON
Power Up
12.08
Default
OFF
Page 49
Safety Features/Start Up Sequence
13/08/03