Table of Contents
Advertisement
Controller Protection
______________________________________________________________________________
High Voltage Cutout
Calibrator Menu Reference:
Minimum
Maximum
High V
50.0V or
Start
58.0V
The maximum High Voltage Cutout depends on the level of the System Voltage item. If the
System Voltage is set to 36V or lower, then the maximum is 50.0V. If the System Voltage is set
greater than 36V, then the maximum is 58.0V.
MillipaK 4QPM Controller Manual
Immediate
11.11
Step Size
Typical Value
0.5V
50.0V or 58.0V
Page 61
Under/Over Voltage Protection
13/08/03
Advertisement
Table of Contents
