Power Steer - Sevcon MillipaK 4QPM Manual

Features
______________________________________________________________________________

Power Steer

A contactor drive is available to control a separate Power Steer motor. An adjustable delay allows
the motor to operate for a set time, after the power steer trigger or power steer demand has been
removed.
The following triggers are available and configurable for power steer:
Power Steer Trigger
Configuration Item
0
1
2
3
4
5
6
7
Table 7: Internal Power Steer Triggers
The software also monitors the motor for movement (if the Anti-Roll-Off feature is enabled) and
activates the power steer driver accordingly.
Power Steer Personalities:
Power Steer Timer
Calibrator Menu Reference:
Minimum Maximum
0S 60S
Power Steer Trigger
Calibrator Menu Reference:
Minimum Maximum
0 7
See also contactor drive output configuration (System/Digital IO).
MillipaK 4QPM Controller Manual
FS1 switch Fwd or Rev switch
No
Yes
No
Yes
No
Yes
No
Yes
Immediate
9.01
Step Size Typical Value
1S 2S
Power On
12.14
Step Size Default
1 0
Standard Features/Power Steer
Triggers
No
No
Yes
Yes
No
No
Yes
Yes
Page 37
Seat switch
No
No
No
No
Yes
Yes
Yes
Yes
13/08/03