Sro (Static Return To Off) - Sevcon MillipaK 4QPM Manual

Safety Features
______________________________________________________________________________

SRO (Static return to off)

This feature is optional in the setup menu and when specified, forces the following sequences of
switch inputs to be followed before drive is allowed: Keyswitch-Direction-FS1 or Keyswitch-
FS1-Direction (within SRO delay of FS1). Any other sequence will not allow drive. Drive will be
inhibited if FS1 is active for more than the SRO Delay with no direction selected. In this case the
FS1 will need to be recycled.
Static Return to Off
Calibrator Menu Reference:
Options
OFF
SRO Delay
Calibrator Menu Reference:
Minimum Maximum
0S 5S
MillipaK 4QPM Controller Manual
ON
Step Size
1S
POWER UP
12.02
Default
OFF
Immediate
11.07
Typical Value
2S
Page 51
Safety Features/SRO
13/08/03