Anti-Rolloff - Sevcon MillipaK 4QPM Manual

Safety Features
______________________________________________________________________________

Anti-Rolloff

This feature is designed so that if a vehicle is powered up, without its handbrake applied, any non-
drive condition on a gradient results in the vehicle braking slowly, in a controlled way, down a
ramp without running away. The vehicle has to be stationary at least once after power up before
the feature is applied.
The Roll-Off Electro-brake option may be set so that the Electro-brake (if fitted & configured) is
applied (brakes on) when Roll-Off is detected.
The Roll-Off strength is not adjustable but can be enabled and disabled using the Roll-Off Enable
option.
Roll-Off Enable
Calibrator Menu Reference:
Options
OFF
Roll-Off E-Brake
Calibrator Menu Reference:
Options
OFF
MillipaK 4QPM Controller Manual
ON
ON
Immediate
11.01
Default
ON
Power On
12.05
Default
OFF
Page 54
Safety Features/Anti-Rolloff
13/08/03