Sevcon MillipaK 4QPM Manual page 35

Features
______________________________________________________________________________
Examples:
1. The Accelerator Characteristic is set to Dual Slope, the Creep Speed personality is set to 0%
and the Maximum Speed personality is set to 100%. If the accelerator push was at 70%, then
the accelerator demand and the vehicle speed demand would be 35%.
2. Same conditions as (1) but the Creep Speed personality is set to 10% and the Maximum Speed
is set to 75%. The accelerator push is still 70% and the accelerator demand is still 35%, but
now the vehicle speed demand is 32.75%. i.e.:
=
Speed Demand
=
=
MillipaK 4QPM Controller Manual

(
+
Creep Speed Maximum


 35
( )
+ − ×
10  75 10
100

32 . 75 %
Performance/Accelerator Characteristics
−
Speed Creep



Page 35
Accelerato r
)
×
Speed
100
Demand



13/08/03