Table of Contents
Advertisement
Configuration
______________________________________________________________________________
Creep Speed
The Creep speed is adjustable and is used to select a minimum pulsing level as soon as drive is
requested, to minimise delays and dead-bands. The motor voltage is rapidly ramped to the creep
level (equivalent to a 100mS acceleration delay).
Creep Speed
Calibrator Menu Reference:
Minimum
Maximum
0%
25%
MillipaK 4QPM Controller Manual
Immediate
3.01
Step Size
Typical Value
1%
0%
Page 32
Performance/Creep Speed
13/08/03
Advertisement
Table of Contents
