Senlan Hope800 Series Manual page 141

0.0~6553.5kWh. Pressing
Description
meter timer.
FU-39
Setting 0.00~655.35h. Pressing
range meter kWh.
FU-40 Digital input terminal status 1
Ten thousands digit: X5
Description Hundreds digit: X3
(0: Open
FU-41 Digital input terminal status 2
Description Hundreds digit: REV
FU-42 Digital output terminal status
Thousands digit: T2
Description
(0: Open
FU-43 Expansion digital input terminal status
Ten thousands digit: X11
Description
Hundreds digit: X9
FU-44 Expansion digital output terminal status
Ten thousands digit: Y7
Description Hundreds digit: Y5
(0: Open
FU-45 Communication error times
Description 0~60000
FU-46 Reference frequency after accel/decel
Description Frequency created after acceleration/deceleration
FU-47
Description Frequency output by the inverter (used by factory)
FU-50
FU-51
Actual position size can be reflected during position control. Based on 32 bit binary numbers, high word
Description
refers to high 16 bits and low word refers to low 16 bits.
FU-52
FU-53 Count value high word of counter 2
FU-54 Count value low word of counter 2
Deviation of rated position and actual position can be reflected during position control. Based on 32 bit
Description
binary numbers, high word refers to high 16 bits and low word refers to low 16 bits.
FU-55
Description
It is cleared by pressing
FU-60 Total run time of air blower
Others
and
Watt-hour meter timer
and
Thousands digit: X4
Tens digit: X2
1: Closed)
Tens digit: FWD
Hundreds digit: T1
1: Closed)
Thousands digit: X10
Tens digit: X8
Thousands digit: Y6
Tens digit: Y4
1: Closed)
Output frequency
Coder position high word
Coder position low word
Communication poll cycle
Max. current holding
and
Reserved
concurrently clears this parameter itself and the watt-hour
Min. unit
concurrently clears this parameter itself and the watt-hour
Min. unit
Units digit: X1
Min. unit
Units digit: X6 (0: Open
Min. unit
Tens digit: Y2
Min. unit
Units digit: X7 (0: Open
Min. unit
Units digit: Y3
Min. unit
Min. unit
Min. unit
Min. unit
Min. unit
Min. unit
Min. unit
Min. unit
Min. unit
.
concurrently
Min. unit
Min. unit
6 Parameter Description
0.01h Change
1 Change
1 Change
1: Closed)
1 Change
Units digit: Y1
1 Change
1: Closed)
1 Change
1 Change
0.01Hz Change
0.01Hz Change
1
Change
1
Change
0.001s Change
1
Change
1
Change
0.1A Change
1h
Change
- Change
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
△
-
137