Senlan Hope800 Series Manual page 101

Units digit: PLC cycle mode
0: PLC operation disabled
1: N cycles(cycle number decided by F8-02)+stop
2: N cycles+final stage speed (cycle number decided by F8-02)
3: Continuous cycle
Tens digit: PLC restart mode
Setting
0: Restart from the first stage
range
1: Restart from the frequency of the interrupted stage
2: Restart from the operating frequency at the moment of interruption
Hundreds digit: Whether to save PLC status parameters after power-off
0: Not store
Thousands digit: Unit of time for each stage
0: Second
F8-01
Units digit: PLC mode/stage number
0: 1×48, 1 mode(mode 0), 48 stages
1: 2×24, 2 modes(mode 0~1), 24 stages for each mode
2: 3×16, 3 modes(mode 0~2), 16 stages for each mode
3: 4×12, 4 modes(mode 0~3), 12 stages for each mode
Setting
4: 6×8, 6 modes(mode 0~5), 8 stages for each mode
range
5: 8×6, 8 modes(mode 0~7), 6 stages for each mode
Tens digit: PLC mode select
0: Binary code select
Mode 2
Mode 7
F8-02
Setting
1~65535
range
F8-03~
F8-97
Stage 1 setting and accel/decel setting
Setting
range
Units digit: Direction
0: Forward
Tens digit: Accel/decel time select
0: Accel/decel 1
4: Accel/decel 5
F8-04~
F8-97
Setting range:
thousands digit of F8-00.
The settings for stages 2~48 are similar to that for stage 1. The default value of the multistep frequency n
equals its respective stage number. Refer to the following table.
n
Stage n setting
Stage n time
Multistep frequency n
n
1: Store
1: Minute
PLC mode
1: Direct select
5: Mode 3
PLC cycle number
1: Reverse
1: Accel/decel 2
5: Accel/decel 6
Stage 1 time
0.0~6500.0 (second or minute). The time unit is determined by the
1 2
F8-03 F8-05 F8-07
F8-04 F8-06 F8-08
F4-18 F4-19 F4-20
9 10
Default
2: Mode 0
6: Mode 4 7: Mode 5
Default
Default
2: Accel/decel 3
6: Accel/decel 7
Default
3 4
F8-09 F8-11
F8-10 F8-12
F4-21 F4-22
11 12
6 Parameter Description
00 Change
3: Mode 1
8: Mode 6
1 Change
00 Change
3: Accel/decel 4
7: Accel/decel 8
0.0 Change
5 6
F8-13 F8-15
F8-14 F8-16
F4-23 F4-24
13 14 15
×
4:
9:
×
○
○
7 8
F8-17
F8-18
F4-25
16
97