Senlan Hope800 Series Manual page 127

Units digit: sets the functions
0: If in-phase input>opposite-phase input, the comparator outputs 1, otherwise outputs 0
1: If in-phase input<opposite-phase input, the comparator outputs 1, otherwise outputs 0
2:
band/2), the comparator outputs 1, otherwise outputs 0
3:
band/2), the comparator outputs 1, otherwise outputs 0
Setting
4: Comparison is invalid, and the output is constant 1
range
5: Comparison is invalid, and the output is constant 0
Tens digit: determines whether to take the absolute value
0: No
Hundreds digit: selects the protection function for comparator output
0: No action
2: The inverter coasts to a stop due to fault(Er.Co1 or Er.Co2 displayed)
FE-03
Setting
-100.0~100.0％(corresponding to analog output 28)
range
FE-04
Setting
0.0~100.0％
range
FE-05
Setting
Refer to the table of digital input functions in Section 6.5
range
FE-06 Comparator 2 in-phase input select
FE-07 Comparator 2 opposite-phase input select
FE-08
Comparator 2 digital setting(corresponding to
FE-09
FE-10
FE-11
Setting
All settings for comparator 2 are identical to that for comparator 1
range
 The structure of the comparator is as the following diagram.
Analog output
0～44
In-phase
input select
Whether input is
absolute value or not
Analog output
0～44
Opposite-phase
input select
 The functions of the comparator are shown in the following diagrams.
If in-phase input=opposite-phase input(|in-phase input-opposite-phase input|≤error
If in-phase input≠opposite-phase input(|in-phase input-opposite-phase input|≤error
1: Yes
1: The motor continues running with an alarm
Comparator 1 digital setting
Comparator 1 error band
Comparator 1 output select
Comparator 2 config
analog output 29)
Comparator 2 error band
Comparator 2 output select
Default
Default
Default
Default
Default
Default
Default
Default
Default
＞
＜
＝
≠
1
Comparator
function setting
0
6 Parameter Description
50.0％ Change
Change
5.0％
0 Change
0 Change
0 Change
005 Change
Change
50.0％
5.0％ Change
0 Change
Ditital output 47 & 48
Comparator output
Digital input
0～55
Comparator
output select
○
○
○
○
○
○
○
○
○
123