Table of Contents
Advertisement
Super X13DSF-A User's Manual
2.3 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Tools Needed
Phillips Screwdriver (1)
PSU1
JPW2
P1_NVME0/1
P1_NVME2/3
FAN8
FAN7
Locations of Mounting Holes
Note 1: To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lbf-in on each mounting screw during motherboard installation.
Note 2: Some components are very close to the mounting holes. Please take precau-
tionary measures to avoid damaging these components when installing the mother-
board to the chassis.
Phillips Screws (12)
P1-AIOM PCIe 5.0x16 (J139)
SATA 0~3 (JS1)
JSB1
JPW3
JRK1
PCH
JBT1
CPLD
X13DSF-A
REV:1.01
BAR CODE
DESIGNED IN USA
CPU1
P1_NVME10/11
P1_NVME8/9
P1_NVME4/5
P1_NVME6/7
FAN6
FAN5
Standoffs (12)
(Only if Needed)
P2-AIOM PCIe 5.0 x16 (J7)
M.2-H2
M.2-H1
BMC
JIPMB1
LEDBMC
USB2/3 (3.0)
MT1_1
MT1_2
BIOS LICENSE
MT2_1
MT2_2
MAC CODE
MAC CODE
CPU2
P2_NVME0/1
BT1
P2_NVME2/3
P2_NVME4/5 P2_NVME6/7
FAN4
FAN3
52
JTPM1
JNCSI1
JL1
PSU2
JPW1
JFP1
LEDPWR
JRU1
FAN2
FAN1
P2_NVME8/9
P2_NVME10/11
Advertisement
Table of Contents
