Supermicro X13DSF-A User Manual page 128

Super X13DSF-A User's Manual
PXE Boot Wait Time (Available when "Network Stack" is set to Enabled)
Use this feature to set the wait time (in seconds) upon which the system BIOS will wait for
you to press the <ESC> key to abort PXE boot instead of proceeding with PXE boot by
connecting to a network server immediately. Press "+" or "-" on your keyboard to change the
value. The default setting is 0.
Media Detect Count
Use this feature to select the wait time (in seconds) for the BIOS ROM to detect the presence
of a LAN media either via the Internet connection or via a LAN port. Press "+" or "-" on your
keyboard to change the value. The default setting is 1.
MAC:(MAC address)-IPv6 Network Configuration
Enter Configuration Menu
The following information is displayed:
Interface Name / Interface Type / MAC address / Host address / Route Table / Gateway
addresses / DNS addresses
Interface ID
Use this feature to change/enter the 64-bit alternative interface ID for the device. The
string format is colon separated. The default setting is the MAC address above.
DAD Transmit Count
This feature displays the number of consecutive neighbor solicitation messages have
been sent while performing duplicate address detection on a tentative address. The
default setting is 1.
Policy
Use this feature to select how the policy is to be configured. The options are automatic
and manual.
Advanced Configuration (Available when "Policy" is set to manual)
New IPv6 address
Use this feature to enter the IPv6 address for the local machine.
New Gateway address
Use this feature to set the gateway address for the local machine.
128