Supermicro X13DSF-A User Manual page 129

New DNS address
Use this feature to set the DNS server address for the local machine.
Commit Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
Discard Changes and Exit
Press <Enter> to discard changes and exit. The options are Yes and No.
Save Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
MAC:(MAC address)-IPv4 Network Configuration
Configured
Select Enabled to show whether the network address has been successfully configured.
The options are Disabled and Enabled.
Enable DHCP (Available when "Configured" is set to Enabled)
Select Enabled to support Dynamic Host Configuration Protocol (DHCP) which allows the
BIOS to search for a DHCP server attached to the network and request the next available
IP address for this computer. The options are Disabled and Enabled.
Local IP Address (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to enter an IP address for the local machine.
Local NetMask (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the netmask for the local machine.
Local Gateway (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the gateway address for the local machine.
Local DNS Servers (Available when "Configured" is set to Enabled and "Enabled
DHCP" is set to Disabled)
Use this feature to set the Domain Name System (DNS) server address for the local
machine.
Save Changes and Exit
Press <Enter> to save changes and exit. The options are Yes and No.
129
Chapter 4: UEFI BIOS