Table of Contents
Advertisement
Super X13DSF-A User's Manual
2.6 Connectors/Ports on the AOM-DSF-IO
BMC LAN Port
A dedicated BMC LAN port (BMC_LAN) is located on the AOM-DSF-IO. The dedicated BMC
LAN port provides LAN support for the Baseboard Management Controller (BMC). Connect
an RJ45 cable to this LAN port for BMC LAN support. Please refer to Section 2.10
82) for LAN LED information.
COM Header
One COM header that supports serial link interface is on the AOM-DSF-IO. This COM header
is located at COM1. Refer to the layout below for the location of COM1.
I/O Module Connector
An I/O module connector is located at JSB2 on the AOM-DSF-IO. Use JSB2 to connect the
I/O module to the motherboard. Refer to the layout below for the location of JSB2.
VGA
USB0/1 (3.0)
DESIGNED IN USA
3
JSB2
1
BMC_LAN
AOM-DSF-IO
REV:1.00
MH1
58
1. BMC LAN Port (BMC_LAN)
2. COM Header (COM1)
3. I/O Module Connector (JSB2)
2
COM1
(page
Advertisement
Table of Contents
