Supermicro X13DSF-A User Manual page 158

Super X13DSF-A User's Manual
Set User Password (Available when "Security Frozen:" above is No)
Press <Enter> to set the HDD user password.
Secure Boot
Note: For detailed instructions on how to configure Security Boot settings, please refer
to the Security Boot Configuration User's Guide posted on the web page under the
link: https://www.supermicro.com/support/manuals/.
The following information is displayed:
•
System Mode
•
Secure Boot
Secure Boot
Select Enabled to configure Secure Boot settings. The options are Disabled and Enabled.
Secure Boot Mode
Use this feature to select the desired secure boot mode for the system. The options are
Standard and Custom.
CSM Support
If this feature is set to Enabled, legacy BIOS boot mode will be supported by the system.
Please make sure you use the device with compatibility support for legacy boot. The options
are Disabled and Enabled.
Restore Factory Keys (Available when "Secure Boot Mode" is set to
Custom)
Select Yes to restore manufacturer default keys used to ensure system security. The options
are Yes and No.
Reset To Setup Mode (Available when "Secure Boot Mode" is set to
Custom)
This feature resets the system to Setup Mode.
Enter Audit Mode (Available when "Secure Boot Mode" is set to
Custom)
Select Ok to enter the Audit Mode workflow. It will result in erasing of Platform Key (PK)
variables and reset system to the Setup/Audit Mode.
158