Table of Contents
Advertisement
BMC LAN LEDs
The AOM-DSF-IO provides a dedicated BMC LAN connection. The LED on the right side
of the BMC LAN port indicates activity, and the LED on the left indicates the speed of the
connection. Refer to the table below for more information.
BMC LAN LEDs
Color/State
Green: Solid
Link (left)
Amber: Solid
Activity (Right)
Amber: Blinking
Unit ID LED
The rear UID LED indicator is located at LED1 on the AOM-DSF-IO. This UID indicator
provides easy identification of a system that may need service.
Note: For information on UID LED Indicators and BMC Heartbeat LED Indicator, please
refer to the section on UID LED/BMC Reset Switch and LED Indicator on
VGA
USB0/1 (3.0)
DESIGNED IN USA
AOM-DSF-IO
JSB2
Definition
100 Mbps
1Gbps
Active
UID LED
LED Indicator
LED Color
Definition
Blue: On
System Identified
1
BMC_LAN
REV:1.00
MH1
83
Chapter 2: Installation
LAN 1/LAN 2
BMC_LAN
Link LED
IPMI LAN
(X8ST3-F)
1. BMC LAN LEDs on the
2
AOM-DSF-IO
2. Rear UID LED (LED1) on
the AOM-DSF-IO
COM1
Activity LED
page
59.
Advertisement
Table of Contents
