Supermicro X13DSF-A User Manual page 98

Super X13DSF-A User's Manual
potential; however, this may consume maximal amount of power as energy is needed to
fuel processor operation. Select Performance to enhance system performance; however,
this may consume more power as energy is needed to fuel the processors for operation.
The options are Extreme Performance, Maximum Performance, Performance, Balanced
Performance, Balanced Power, Power, and Max Power Efficient. (Please note that the
options of "Extreme Performance" and "Max Power Efficient" are motherboard-specific.)
Optimized Power Mode (Available when "Power Technology" is set to Custom)
Set this feature to Enable to reduce overall power consumption. The options are Disable
and Enable. When this feature is set to Enable, the features below will be automatically
set by the BIOS:
•
"Power Performance Tuning" - BIOS controls EPB
•
"ENERGY_PERF_BIAS_CFG Mode" - Performance
•
"Enhanced Halt State (C1E)" - Enable
CPU P State Control

This feature allows you to configure the following CPU power settings:
AVX P1 (Available when "SpeedStep (P-States)" is set to Enable)
Use this feature to set the appropriate TDP level for the system. The Intel Advanced
Vector Extensions (Intel AVX) P1 feature allows you to set the base P1 ratio for Stream-
ing SIMD Extensions (SSE) and AVX workloads. Each P1 ratio has the corresponding
AVX Impressed Current Cathodic Protection (ICCP) pre-grant license level, which refers
to the selection between different AVX ICCP transition levels. The options are Nominal,
Level 1, and Level 2.
Note: The Intel Speed Select Technology (Intel SST) related features are available
when the supported CPU is installed.
Intel SST-PP (Available when "SpeedStep (P-States)" is set to Enable and
"Dynamic SST-PP" is set to Disable)
This feature allows you to choose from two additional Base-Frequency conditions maxi-
mum for CPU P State Control. The options are Auto, Level 0, Level 3, and Level 4.
(SST-PP is the abbreviation for Speed Select Technology-Performance Profile.)
Dynamic SST-PP (Available when "SpeedStep (P-States)" is set to Enable and
when your CPU supports the Intel Speed Select function)
If this feature is set to Enable, it allows you to configure Intel SST-PP features, including
Base, Configuration 3, and Configuration 4 settings under various processor working
conditions. The options are Disable and Enable.
98