Supermicro X13DSF-A User Manual page 78

Super X13DSF-A User's Manual
VROC RAID Key Header
An Intel VROC RAID Key header is located at JRK1 on the motherboard. Install a VROC
RAID Key on JRK1 for NVMe RAID support as shown in the illustration below. Please refer
to the layout below for the location of JRK1.
Note: For detailed instructions on how to configure VROC RAID settings, please refer
to the VROC RAID Configuration User's Guide posted on the web page under the link:
https://www.supermicro.com/support/manuals/.
Intel VROC Key
Pin Definitions
Pin# Definition
1 Ground
2 3.3V Standby
3 Ground
4 PCH RAID Key
Note: The graphics contained in this user's manual are for illustration only. The compo-
nents installed in your system may or may not look exactly the same as the graphics
shown in the manual.
P1-AIOM PCIe 5.0x16 (J139)
SATA 0~3 (JS1)
JPW3
1
JRK1
PCH
PSU1
JPW2
DESIGNED IN USA
CPU1
P1_NVME0/1
P1_NVME2/3 P1_NVME8/9
P1_NVME4/5 P1_NVME6/7
FAN8 FAN5
FAN7 FAN6
P2-AIOM PCIe 5.0 x16 (J7)
JTPM1
M.2-H1
JSB1 M.2-H2
JNCSI1
BMC
JL1
JIPMB1
LEDBMC
USB2/3 (3.0)
MT1_1 MT1_2
JBT1
PSU2
CPLD
BIOS LICENSE
MT2_1 MT2_2
X13DSF-A
MAC CODE
REV:1.01
BAR CODE
MAC CODE
CPU2
P2_NVME0/1
P1_NVME10/11
BT1
P2_NVME2/3 P2_NVME4/5 P2_NVME6/7
FAN4 FAN3 FAN2
1. VROC RAID Key Header (JRK1)
JPW1
JFP1
LEDPWR
JRU1
FAN1
P2_NVME8/9 P2_NVME10/11
78
VROC Key
VROC Key Header (JRK1)