Supermicro X13DSF-A User Manual page 144

Super X13DSF-A User's Manual
Enroll Certification Using File

This feature allows you to enroll the security certificate in the system by using a file.
Certification GUID
Press <Enter> and input the certification GUID.
Commit Changes and Exit

Use this feature to save all changes and exit TLS settings.
Discard Changes and Exit

Use this feature to discard all changes and exit TLS settings.
Delete Certification
This feature is used to delete the certificate if a certificate has been enrolled in the system.
Intel(R) VROC SATA Controller
Note 1: This section is based on your system features and related device(s) installed.
Note 2: This section is available when "SATA Mode Selection" is set to RAID.
Note 3: Refer to PCH SATA0 Configuration, PCH SATA1 Configuration, and PCH
SATA2 Configuration submenus in the BIOS Setup main menu to set "SATA Mode
Selection" (page
The following information is displayed.
•
Intel VROC SATA driver version
Create RAID Volume
Name:
This feature allows you to enter the unique name of RAID volume.
RAID Level:
This feature allows you to select the RAID level. The options are RAID0(Stripe),
RAID1(Mirror), RAID5(Parity), and RAID10(RAID0+1).
Select Disks:
Select the desired RAID disks one by one by setting them to X. The options are (not
selected) and X (selected).
118).
144