Supermicro X13DSF-A User Manual page 131

NVMe Firmware Source
Use this feature to select the NVMe firmware to support system boot. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
VGA Priority
Use this feature to select the graphics device to be used as the primary video display for
system boot. The options are Onboard and Offboard.
For the following features, please note that:
Note 1: The number of slots and slot naming vary based on your motherboard features.
Note 2: The option of Legacy is available when "Boot Mode Select" is set to Dual or
Legacy.
Note 3: Refer to Boot submenu in the BIOS Setup main menu to set "Boot Mode
Select".
Onboard Video Option ROM
Select EFI to allow you to boot the computer using the Extensible Firmware Interface (EFI)
device installed on the onboard video port. The options are Disabled, EFI, and Legacy.
M.2-H1 OPROM / M.2-H2 OPROM / P1_PE1 0-15 OPROM / P2_PE1 0-15 OPROM
/ CPU1 AIOM PCIe 5.0x16 OPROM / CPU2 AIOM PCIe 5.0x16 OPROM / Onboard
NVMe1 Option ROM / Onboard NVMe2 Option ROM / Onboard NVMe3 Option ROM
/ Onboard NVMe4 Option ROM / Onboard NVMe5 Option ROM / Onboard NVMe6
Option ROM / Onboard NVMe7 Option ROM / Onboard NVMe8 Option ROM /
Onboard NVMe9 Option ROM / Onboard NVMe10 Option ROM / Onboard NVMe11
Option ROM / Onboard NVMe12 Option ROM / Onboard NVMe13 Option ROM /
Onboard NVMe14 Option ROM / Onboard NVMe15 Option ROM / Onboard NVMe16
Option ROM / Onboard NVMe17 Option ROM / Onboard NVMe18 Option ROM /
Onboard NVMe19 Option ROM / Onboard NVMe20 Option ROM / Onboard NVMe21
Option ROM / Onboard NVMe22 Option ROM / Onboard NVMe23 Option ROM /
Onboard NVMe24 Option ROM
Select EFI to allow you to boot the computer using the EFI device installed on the PCIe slot
specified. The options are Disabled, Legacy, and EFI.
HTTP Boot Configuration

HTTP Boot Policy
Use this feature to set the HTTP boot policy. The options are Apply to all LANs, Apply to
each LAN, and Boot Priority #1 instantly.
131
Chapter 4: UEFI BIOS