Table of Contents
Advertisement
Super X13DSF-A User's Manual
Quick Reference Table
Jumper
Description
JBT1
CMOS Clear
JRU1
UID LED/BMC Reset/System Reset
LED
Description
LEDBMC
BMC Heartbeat LED
LEDPWR
Power LED
Connector
Description
BT1
Onboard CMOS Battery
FAN1 – FAN8
4-pin Cooling Fan Headers
JFP1
Front Control Panel Header with I²C
JIPMB1
4-pin BMC External I2C Header
JL1
Chassis Intrusion Header
JNCSI1
Network Controller Sideband Interface (NC-SI) Connector for BMC shared LAN
JPW1, JPW2
8-pin Power Connectors
JPW3
4-pin Power Connector
JRK1
Intel VROC Key Header
JSB1
Rear I/O Module Connector
JTPM1
Trusted Platform Module/Port 80 Connector
M.2-H1, M.2-H2
NVMe PCIe 3.0 x4 / SATA 3.0 Hybrid M.2 Slots (Support M-Key 2280 and 22110)
MT1_1, MT2_1;
MT1_1, MT2_1: M.2-H1 Mounting Holes;
MT1_2, MT2_2
MT1_2, MT2_2: M.2-H2 Mounting Holes
P1-AIOM (J139),
Supermicro Advanced Input/Output Module (AIOM) PCIe 5.0 x16 Connectors for rear I/O
P2-AIOM (J7)
support (OCP 3.0 SFF compliant)
P1_NVME0/1 –
Six PCIe 5.0 x8 MCIO Connectors supported by CPU1
P1_NVME10/11
P2_NVME0/1 –
Six PCIe 5.0 x8 MCIO Connectors supported by CPU2
P2_NVME10/11
P1_PE1 0-15 (J1)
GenZ x16 Slot (PCIe 5.0) supported by CPU1
P2_PE1 0-15 (J3)
GenZ x16 Slot (PCIe 5.0) supported by CPU2
PSU1, PSU2
Power Supply Unit Connectors for system power use
SlimSAS LP Connector with support of four Intel PCH SATA 3.0 connections (Supports
SATA 0~3 (JS1)
RAID 0, RAID 1, RAID 5, and RAID 10)
USB2/3 (3.0)
USB 3.0 Header for front panel USB 3.0 ports
Note: The RAID support on this motherboard is limited since Intel VROC and RSTe
are being discontinued.
Default Setting
Open (Normal)
Pins 1-2: UID LED/BMC Reset (Default)
Pins 2-3: System Reset
Status
Blinking Green: BMC Normal (Active),
Solid Green: During BMC Reset or during a Cold Reboot
LED On: Onboard Power On
12
Advertisement
Table of Contents
