Lacquer Preparations - WAGNER GA 5000EAC Operating Manual

Operating manual GA 5000EAC Electrostatic Automatic Spray Gun (AirCoat)
6 Assembly and Commissioning
7
B_00137
Earthing schema (example)
Pos Part / workstation
1 Conveyor
2 Reciprocator
3 Work piece
4 Spraying stand
5 Floor, static dissipative
6 Paint tank
7 Product supply
8 Control unit
6.5 LACQUER PREPARATIONS
The viscosity of the lacquer is of great importance. The best spraying results are obtained
with values between 25 and 40 DIN/4 seconds (measured in immersion flow cup DIN 4 mm;
0.16 inch).
Processing of up to 60 DIN/4 seconds is generally possible without problem if high coating
thicknesses are required.
With the WAGNER AirCoat flat jet spraying process, the different viscosities of the lacquer are
optimally covered by two air cap types. These can be found in "Accessories".
In the case of application problems contact the lacquer manufacturer.
36
8
6
5
2
3
Rmax < 1MΩ
Minimum cable cross section
2
16 mm / AWG 6
2
16 mm / AWG 6
2
16 mm / AWG 6
—
—
2
4 mm / AWG 12
2
4 mm / AWG 12
2
4 mm / AWG 12
Order number 2360922 | Edition 09/2022
1
4