Adjust The Spray Angle With Fl At Jet Nozzle; Fitting Or Changing Round Jet Nozzle - WAGNER GM 2800EA Operating Manual

Electrostatic air spray gun for manual operation with fl at or round jet nozzles

Hide thumbs Also See for GM 2800EA:

Table of Contents

EDITION 03/ 2007

OPERATING MANUAL

5.4.2

ADJUST THE SPRAY ANGLE WITH FLAT JET NOZZLE

The spray pattern can be adjusted to suit the object being sprayed using the fan air regula-

tor.

Other nozzle sizes can be used to obtain larger or smaller spraying patterns.

View A

Back sight (Seen from the spraying direction)

Wide spray angle = minimal

shaping air adjustment

Fan air regulator

Narrow spray angle = maximal

shaping air adjustment

5.4.3

1. Switch off control unit.

2. Relieve spray gun and unit pressure.

3. Replace paint with cleaning solvent and

4. Thoroughly ﬂ ush spray gun: always point

spray gun downwards while ﬂ ushing

5. Relieve spray gun and unit pressure.

6. Dry material hose and gun by blowing

through with dry and clean air.

7. Unscrew the nozzle nut (B) by hand and

remove it.

8. Remove the nozzle body (C) and the

nozzle insert Supra (A).

9. Unscrew nozzle insert Supra (A) with

nozzle spanner (I) from the nozzle body

10. Re-assemble in reverse order.

Note

To protect the electrode-needle replace the

cap (D) when the gun is not in use.

PART NO. DOC388891

GM 2800EA

Table of Contents