Test/Maint Menu; Datalog Setup; Output Setup; Current Inputs - Hach sc1000 User Manual

Operation

5.5 Test/Maint Menu

5.5.1 Datalog Setup

Datalog Setup
ERASE DATA/EVENT LOG
Select the device to delete from the data or event log.

5.5.2 Output Setup

mA Output INT—Choose probe module
FUNCTION TEST–Select Output 1–4
Test the outputs on the selected module.
STATUS OUTPUT–Select Status 1–4
Displays the status of the outputs on the selected module.

5.5.3 Current Inputs

mA Input INT—Choose probe module
FUNCTION TEST
Displays the status of the inputs on the selected model.

5.5.4 Relay

Relay Module—Choose probe module
RELAY STATUS
Displays the status of the outputs for the relay cards.
FUNCTION TEST
Tests the relays on the selected module.

5.5.5 Network Modules

Network Modules—Choose Network Module
STATUS—Displays the attached communication modules and automatically runs a status check

5.5.6 Display Info

Display Info
SOFTWARE VERSION
Displays the software version for the sc1000 display.
网址：www.mamots.com
52
The System Setup menu is dependent on the configuration of the system. The Service
Menu can include, depending on configuration, Datalog Setup, Check Cal/Hold,
Simulation, Output Setup, Current Inputs, Relay, Overfeed Reset, Network Modules,
Network Status, Display Information.
客服：400 688 9809
电话：0431-85178766