Adjusting The Measured Value Display - Hach sc1000 User Manual

Operation
Figure 41 List Box
1. Scrolls up or down
2. –cancels the selection
CANCEL
3. –confirms a selection
ENTER
Figure 42 Message window
1
1. Scrolls up or down
2. Displays the messages or warnings
3. Displays the messages or warnings
4. Displays details on the selected entry
5. –confirms an entry
ENTER
6. –cancels an entry
CANCEL

5.1.4 Adjusting the Measured Value Display

网址：www.mamots.com
44
mg/l
g/l
ppm
mE
E
m-1
FNU
NTU
2
COMMUNICATION ERROR
Ph [11f20030007]
The measured value display shows between 1 and 4 measured values simultaneously.
The values to be displayed are selected from the Measurement Value Display List
(see section 5.1.3 on page
mA output values or input (mA or digital) values. To view values other than those visible on
the screen, use the scroll
the display module displays the measured value from a connected and selected sensor
(refer to section 5.1.4.1 on page
To view several measured values:
1. Tap the bottom-left of the screen to display the pop-up toolbar.
2. Select the or button to view 2 or 4 values, respectively. To view more than 4 values
2 4
simultaneously, select the
1
3 4
42) and can be values provided by sc sensors, relay status,
and keys on the pop-up toolbar. In normal operation
UP DOWN
45).
button (Figure 35 on page
LIST
客服：400 688 9809
2
3
5
6
40).
电话：0431-85178766