Device Management; Display Settings; Browser Access - Hach sc1000 User Manual

5.4.5 Device Management

Device Management—used to display installed devices, scan for new devices, and delete devices.
DEVICE LIST
Lists all the devices and expansion cards installed and registered in controller.
SCANNING FOR NEW DEVICES
Scans for newly installed sensors and expansion cards.
DELETE DEVICES
Deletes devices or sensors from the controller configuration.

5.4.6 Display Settings

Display Settings
LANGUAGE
Select the appropriate language to be displayed on the screen.
BACKLIGHT
This menu is only available in TIMER Mode. Select a High, Medium, or Low brightness. Select the type of Mode;
ON/TIMER. Enter the Timer mode start and stop times.
BRIGHTNESS
Increase or decrease the contrast on the screen.
DATE/TIME
Select the date format and set the date and time (24-hour format).
LOCATION
Enter the information on the location of the device.
TOUCHSCREEN CALIBRATION
The touch screen is sensitive to an individual operator. The touch screen calibration will display a set of calibration points.
Touch each calibration point to calibrate the touch screen for the current operator.

5.4.7 Browser Access

Browser Access
LOGIN PASSWORD
Password not available at this time. Press
DHCP
Select YES or NO. If NO is selected, a fixed IP address must be entered.
NETWORK NAME
If YES to DHCP is selected, a network name is user defined.
IP ADDRESS FOR SERVICE PORT
If NO to DHCP is selected, enter the fixed IP address.
NETMASK
If YES to DHCP is selected, this option is designed to mask a portion of the IP address. 255.255.255.0 is the standard
default.
网址：www.mamots.com
without typing a password.
ENTER
Operation
客服：400 688 9809
电话：0431-85178766
51